Enjoy long-lasting fragrance with just a few simple steps:

1️⃣ Prepare the Diffuser

• Unscrew the wooden cap.
• Remove the plastic stopper that keeps oil from leaking.
• Replace and tighten the wooden cap securely.

2️⃣ Activate the Fragrance

• Gently tilt the diffuser upside down for 1–2 seconds to let oil soak into the wooden/reed top.
• Avoid over-saturating (this may cause leaks).
• Tip: I recommend doing this after hanging it securely.

3️⃣ Hang & Enjoy

• Use the attached string/cord to hang from your rearview mirror.
• Make sure it’s secure and doesn’t block your view.
• When the scent fades, gently tilt again to refresh.

💡 Extra Tips

• Some diffusers include a bead/stopper on the string to prevent oil traveling upward. Keep it in place.
• If spills happen, wipe immediately with a tissue/paper towel, then clean with car interior cleaner. Car surfaces don’t like fragrance oil!
• To refill:

✨ Now your car is ready to smell amazing, wherever the road takes you!

🕯 How to Use Your Candle

Enjoy a safe, clean, and long-lasting burn with these tips:

✂️ Before Burning

• Trim the Wick → Cut to ¼ inch before each use to prevent smoking, flickering, and dripping.
• Remove Debris → Make sure the wax pool is free of wick trimmings, matches, or other objects.
• Safe Location → Place on a stable, heat-resistant surface away from drafts, flammable items, pets, and children.
• First Burn → Burn long enough for melted wax to reach the edges of the container. This prevents tunneling (wax only burning down the center).

🔥 During Burning

• Supervise → Never leave a burning candle unattended.
• Limit Burn Time → Burn for no more than 4 hours at a time to prevent overheating and soot.
• Extinguish Properly → Use a candle snuffer or dip the wick into the melted wax, then straighten it. Avoid blowing out the flame to prevent hot wax splatter.
• Cool Down → Allow the candle to fully cool before moving or relighting.

⚠️ Safety Precautions

• Avoid Drafts → Keep away from vents, fans, and open windows to ensure even burning.
• Keep Away from Flammables → Never burn near curtains, furniture, or papers.
• Check Before Use → Inspect for cracks or damage before lighting.
• If the Flame Gets Too Big → Do not use water (wax + water can cause glass to crack or explode).
• Use Common Sense → If the candle smokes heavily, flickers wildly, or the flame grows too large, extinguish immediately.

✨ Follow these steps for a safer burn and a longer-lasting fragrance experience!

What You’ll Need:

• Wax melt burner (electric or tea light)

• Wax melts of your choice

• Unscented tea light (if using a non-electric burner)

🕯 Step 1: Choose Your Burner

• Electric Burner → Plug in, switch on, and let the gentle heat work its magic.

• Tea Light Burner → Place an unscented tea light in the holder beneath the dish.

🌸 Step 2: Add Your Wax Melt

• Break off 1–2 cubes (or pieces) of wax melt.

• Place them in the top dish of your burner (never add water or oil).

✨ Step 3: Enjoy the Aroma

• The wax will slowly melt, releasing fragrance into the air.

• Sit back, relax, and let your space be filled with scent.

🔄 Step 4: Reuse or Replace

• Wax doesn’t evaporate—only the scent does.

• When the fragrance fades, allow the wax to cool, then remove and replace with fresh melts.

⚠️ Safety Tips

• Always use your burner on a heat-safe, level surface.

• Keep away from drafts, children, and pets.

• Never leave a lit tea light unattended.

• Do not add water, oils, or other substances to the wax.

🌙✨ That’s it—you’re ready to enjoy long-lasting fragrance from your wax melts!

When the fragrance fades, it’s time for a fresh wax melt! Here are easy ways to remove the old wax safely:

🌙 Method 1: Warm & Wipe

1. Turn on (or light) your warmer for 2–3 minutes.
2. Once the wax softens (but isn’t fully liquid), carefully turn it off.
3. Use cotton balls, paper towels, or a soft cloth to soak up and wipe away the wax.
4. Wipe dish clean before adding new melts.

❄️ Method 2: Freeze & Pop Out

1. Let the wax cool completely.
2. Place the warmer dish in the freezer for 10–15 minutes.
3. Gently pop out the hardened wax—it should slide out easily.
4. Wash dish with warm, soapy water and dry before use.

🔥 Method 3: Full Melt & Drain

1. Turn on the warmer until the wax is fully melted.
2. Carefully pour the liquid wax into a disposable container or lined trash.
3. Wipe out any remaining residue with a paper towel.

⚠️ Safety Notes

• Never pour wax down the sink—it can clog drains.
• Always let the dish cool before handling.
• Keep melted wax away from pets, kids, and surfaces.